Earn Passive Income with Crypto: Effortless Strategies for Consistent Gains

passive income with crypto

An Ultimate Comparison: IPOLO V1 Mini Classic and Other Graphics Cards

Are you currently mining Ethereum Classic? If yes, you might want to know how the IPOLO V1 Mini Classic ASIC miner stacks up against other graphics cards. In this article, we will take an in-depth look at the IPOLO V1 Mini Classic and compare its performance with a range of popular graphics cards. So, let’s get started!

Meet the IPOLO V1 Mini Classic

Before we delve into the comparisons, let’s get acquainted with the star of this article – the IPOLO V1 Mini Classic. This mini ASIC miner is specifically designed for mining Ethereum Classic and is capable of delivering 130 MH/s (Mega Hashes per second) at just 104 watts. This makes it an interesting contender when compared to other popular graphics cards out there.

Comparing Hash Rates & Efficiency Ratings

To determine how the IPOLO V1 Mini Classic stacks up against other graphics cards, we will compare the hash rate and efficiency ratings for each card. Efficiency rating is calculated by dividing the hash rate by the power consumption (watts).

For this comparison, we have picked a range of popular graphics cards and collected data on their hash rates, power consumption, and efficiency ratings from WhatToMine, a popular source for mining information.

Please note that these numbers are based on generic hash rates and watts, and can vary depending on your specific overclock and under-volt settings.

The Graphics Card Showdown

Let’s take a look at how the IPOLO V1 Mini Classic compares to other popular graphics cards in terms of hash rate, power consumption, and efficiency ratings.

AMD Radeon RX 470

  • Hash Rate: 26 MH/s
  • Power Consumption: 120 watts
  • Efficiency Rating: 0.21

The AMD Radeon RX 470 is a popular choice for Ethereum Classic mining, delivering a hash rate of 26 MH/s with a power consumption of 120 watts. However, its efficiency rating of 0.21 falls short of the IPOLO V1 Mini Classic.

GeForce GTX 1660 Ti

  • Hash Rate: 28 MH/s
  • Power Consumption: 80 watts
  • Efficiency Rating: 0.35

Another popular graphics card, the GeForce GTX 1660 Ti, performs slightly better than the RX 470, with a hash rate of 28 MH/s and power consumption of 80 watts, leading to an efficiency rating of 0.35.

AMD Radeon RX 580

  • Hash Rate: 30.5 MH/s
  • Power Consumption: 130 watts
  • Efficiency Rating: 0.23

One of the most popular graphics cards for Ethereum Classic mining, the RX 580 provides a hash rate of 30.5 MH/s at 130 watts, resulting in an efficiency rating of 0.23 – a middling contender.

AMD Radeon RX 6600 XT

  • Hash Rate: 32 MH/s
  • Power Consumption: 70 watts
  • Efficiency Rating: 0.45

The RX 6600 XT performs better in terms of efficiency, delivering a hash rate of 32 MH/s at just 70 watts, resulting in an efficiency rating of 0.45 – one of the better contenders in this comparison.

NVIDIA GeForce RTX 3060

  • Hash Rate: 41 MH/s
  • Power Consumption: 110 watts
  • Efficiency Rating: 0.37

The RTX 3060 offers a significant increase in hash rate, reaching 41 MH/s, but consumes 110 watts, leading to an efficiency rating of 0.37.

NVIDIA GeForce RTX 3080

  • Hash Rate: 98 MH/s
  • Power Consumption: 240 watts
  • Efficiency Rating: 0.40

While the RTX 3080 provides an impressive 98 MH/s, it comes with a hefty power consumption of 240 watts, resulting in an efficiency rating of 0.40 – not as impressive as its hash rate might suggest.

IPOLO V1 Mini Classic

Now let’s see how the IPOLO V1 Mini Classic compares in terms of hash rate, power consumption, and efficiency:

  • Hash Rate: 130 MH/s
  • Power Consumption: 104 watts
  • Efficiency Rating: 1.25

With a hash rate of 130 MH/s and power consumption of just 104 watts, the IPOLO V1 Mini Classic boasts an efficiency rating of 1.25, significantly higher than any of the other graphics cards we compared.


While it is up to you to decide whether the IPOLO V1 Mini Classic is the right choice for your Ethereum Classic mining needs, this comparison shows that it offers an excellent balance of high hash rate and low power consumption, resulting in an impressive efficiency rating of 1.25.

If you are interested in learning more about the IPOLO V1 Mini Classic, head over to ipolo.com and check out all the details. And, remember to join the giveaway and get a chance to win the hash rate of this ASIC miner for a month!

You May Also Like

About the Author: Mike Izzo


  1. That's fine bro but they are not match with gpu in price value unless they can give us with rtx 3090 or 3080 gpu price. However efficiency is best on those. I like to buy 5 x 3090 instead of 1 that ipolo.

  2. hi. idk if u can still win this thing but i want to participate. i’m not mining at all but i would love to mine. i’m running some nodes but that’s it. usually iam buying cryptocurrencies bc buying some mining hardware is too much money for me. so sign me up. hopefully i will win this prize. and if not, congrats to the winner 🙂

  3. I got 3 – 3070 pc i am thinking of mining ETC when ETH can not be mined. Do not know if i should go solo or go with something like 2miners and get on a pool. But if so many goes to ETC is it even a reality of should i at that point due to the sheer amount going to it

  4. I m running two iPollo v1 mini classic, one ipollo mini classic plus for etc and one ym200 on eth. I m too lazy to build gpu rigs. I m only using asics. Except for one laptop with rx3080 running umineable for cosmos and it’s cpu for xmr.

  5. Love the idea of GPU mining. About to get into it now GPU price's are dropping… Yer maybe not the best time to do but You've got to be in it to win it right?
    That said especially if your electronic costs have gone up (a LOT here in the UK) the efficacy makes alot of sence.

  6. 1070: 30 – 33 mh and 90-100 watts on etc. 140 watts if works on eth. The reason of that difference is the dag size and the memory issue on 10-series. The same incorrect info on 1060. On ETC that GPU's hashrate is 24-25.5 mh with 60-75 watts.

  7. Uh what 3060 is only doing 41 MH/s right now? LHR is unlocked. Those numbers are totally skewed. And what unholy crap overclocks do you have going on… A 3080 Ti mining ethash at 330W??! I'm mining on one on this PC right now at .46 EFF

  8. yes but again the ipolo is so dang expensive it makes it not worth it… the memory size limitation alone makes this obsolete in a few years or less

    ill stick to my 6600's and 1660 supers

  9. I have just my laptop running on etc right now at about 27 mh. The rest of my farm is on ethereum. I have thought about getting one of the Ipollo miners but they only have 3.6 gb of memory so they can only mine for a little under 2 years until they become doorstops

  10. no offense bro I don't know if you really got terrible silicon lottery or you simply did lazy overclocking. your overclocks are really inaccurate. my 3080ti does 117 mh/s @ 270w (and this is my worst performing 3080ti of the 8 I own). the 3080ti easily beats the 3090 by a mile. you should really start taking some time doing in depth testing instead of trying to push videos every single day. your data has been getting quite unreliable especially in the overclocking category. hope you take it in the right spirit

  11. Awesome vid dude. I have been looking at it because of the lower electric. Right now it is all about etc paid out to btc. However, I am building a 20 series rig in the next few days. Using some cards that are being stored. Probably will start ETC then.

  12. i bought the same ipollo 130 MH/s ETC miner and have had it for a couple weeks it seems to be doing a good job, quiet and efficient I would love to have another one to grow my ETC farming!

  13. I'm mining etc on 7 rx 470 mining versions. They are in a custom enclosure that I made from scratch with 4 delta fans… I messaged you on Twitter asking you to buy them lol

  14. I have not yet mined any.. but from next week. I will be trying etc out. 3060tis and 20 series ive been getting eth and flux/ rvn …. Thanks alot hobbyist Keep up the great work ..!

  15. All my 4gb cards are on ETC. I started mining initially with the 4gb Powercolor RX570 RedDragon I bought for $100 new and unopened back in the end of 2019 and it's been mining since. She's ROId many times now. It was paid for when I sold some of my ETC at $120 😂

Leave a Reply

Your email address will not be published. Required fields are marked *